FKM (Fluorocarbon Rubber or Fluoroelastomer) Raw material
FLUONOXTM KB2252 is a fluoroelastomer which consist of HFP and VDF. FLUONOXTM KB2252 is Bisphenol AF cure incorporated medium-low viscosity fluoroelastomer, which is suitable for compression moulding, transfer moulding, injection moulding, extrusion moulding, and calendaring. FLUONOXTM KB2252 grade is an excellent choice for making O rings, gaskets, hoses and tubes.
* Good compression set resistance
* Better Extrusion behavior
* Better scorch resistance
* Better mould release
* Lack of mould fouling
Safety and Handling
Handling and processing of fluoroelastomer must be done in ventilated areas to prevent personnel exposure to the fumes liberated during curing or use of cured rubber at high temperature. During the process, some fumes may generate at high temperature which are harmful for human beings. Fumes should not be inhaled, eye and skin contact must be avoided. In case of skin contact flush skin with cold water immediately. In case of eye contact, flush with water immediately and seek medical help. Smoking tobacco or cigarettes should not be allowed in working area. Mixing agents that contain metallic particulate such as powdered aluminum can rapidly decompose at high temperature; therefore do not use metallic particulate as mixing agent. . Fluoroelastomer should be stored away from heat. It should be kept in clean and dry area where it can be protected until it is used. Please read the Material Safety Data Sheet before handling the product.